How to refinish dining room table

How to refinish dining room table Step by Step

The human mind always craves novelty. The hope of getting something new in anything makes us anxious. It is human instinct. As a part of this, we always want our house and its furniture to look unique and beautiful. We get fascinated because of these things. A tidy lifestyle helps beauty-hungry people to live a step further. How happy we are if every object in our house is attractive and well-decorated. They give us so much pleasure that we stop drinking and eating and keep observing the decoration and beauty of the house with concentration.

We will try to discuss such a trending and relevant issue in this article on How to refinish dining room table.

The heart of the dining room is the dining table. When hungry, we sit at the messy table without thinking about setting the table. But, serving food on a dirty table is not possible when guests come. So the table’s beauty becomes more important than the food’s deliciousness.

How to refinish a dining room table: Tools needed. 

How to refinish a dining room table Tools needed. 

You can refinish the dining room table with chemicals typically found in every home. Here is a list of the necessary equipment and chemicals to refinish dining tables.

  • Putty knife
  • Oil stain for stain
  • Tung oil or oily polyurethane
  • Cleaning spray 
  • Paper towels
  • Stripper
  • Sandpapers (100, 150, 220)
  • Cotton rags
  • Steel wool
  • Disposable stain brushes
  • Tack cloth
  • Apron
  • Safety eyeglasses
  • Safety Rubber gloves
  • Spirits 
Read More:  How to clean a wood dining table and have a superb look

Here is a step-by-step procedure to refinish the dining table practically.

Think about Safety Measures

Think about Safety Measures

As it is about chemicals, be sure about safety. Whatever chemical you use, carry safety equipment such as hand gloves, goggles, and a full-sleeved apron to protect your hands, eyes, and skin from harm. Also, choose a place with plenty of air circulation for this work.

Clean the Tabletop

Use a paper towel or cotton swab to clean the table surface to restore the finish. It helps to clean dirt and grease from the table surface—Ready up the surface for sanding or stripping to put apart old paint.

Strip the Surface

At this stage, we need stripping. Painted or varnished table surfaces should get stripped very well. Otherwise, it will not precisely clean the table and accomplish this task using recommended non-allergenic chemicals. Next, spray the stripper chemical on the entire surface of the table to allow it to sit as needed.

Then take a putty knife. Clean the surface nicely with the knife and proceed with the striping slowly. But be careful to remove all stains and old paint from the surface.

It relies on the thickness of the paint and the number of stripping coats required.

But striping should do at least twice to make a perfect surface for sanding.

Apply Mineral Spirits 

After properly stripping the tabletop, apply spirit to clean the surface. Use a clean cloth dipped in rubbing alcohol to wipe the recently stripped table surface. Reapply the spirit if not thoroughly cleaned. But make sure that you keep the surface neat and clean to do the sanding job properly.

Sanding

When stripping and cleaning the table surface finished, sand it well. Effective sanding gives the wood a smooth surface to provide the proper finish. Be smart about gouging wood surfaces when using an orbital or belt sander. However, it sounds appropriate to use 10-grit, 150-grit, and 220 sandpaper to smooth the table surface for an ideal paint application or finish.

Read More:  How to Hang a Chandelier Over The Dining Table

First, use 100-grit sandpaper to sand the surface. Sand the same with 150-grit sandpaper. Finally, smooth the table surface with 220 grit sandpaper. Then sand the surface until it is finally smooth.

After sanding the tabletop, clean it with a small paper towel or a clean cloth.

 Stain the Surface

Now that the surface has been appropriately smoothed and cleaned, this step is to apply the stain. Use a disposable brush to apply the stain. Now that the surface has been appropriately smoothed and cleaned, this step is to apply the stain. Use a disposable brush to apply the stain. After applying the stain to the surface, allow it to soak for a few minutes. Wait for some time and remove the excess stain with a cotton rag. Also, use a cotton swab to rub the stain into the crack. Remember that the longer the stain stays on the surface, the darker the final color of the wood will be. So apply it sparingly for a short time for easy removal.

Apply at least two coats of stain to get effective staining results. However, if you prefer dark-colored furniture, you can apply more coats. Staining causes the wood to swell, so sand after each coat avoids this problem. Hence it will be helpful in proper staining.

Apply the Finish

At the final stage, when the last coat of stain is completely cured (usually 24 hours or equivalent time), spread polyurethane or tung oil according to the manufacturer’s pedantry. Leave the table undisturbed for 12 hours after staining is complete. However, 24 hours between finishing and staining shall be the effective interval.

Read More:  How to protect a wood dining table and make it durable

When the table is thoroughly dry, proceed with applying polyurethane or tung oil. You can buy any of the above if you want ease and good results. The manufacturer specifies the finishing instructions on its package. Therefore, its application should correspond to ‍the manufacturer’s instructions.  Be sure to coat the table twice with this chemical, so it remains in good condition even after excessive use. 

As an alternative finish, use Citristrip instead of polyurethane. Depending on the finish of your table, you may like to wrap the table in plastic and embed it overnight (but no longer than 24 hours per the instructions printed on the bottle).

After reviewing the finish at least twice, allow the table to sit for at least 24 hours to dry. After this time, you can find it useful again for dining.

Note: I have taken all these opinions from my reliable resources.

Final Thought:

Based on the above information we can conclude that we can refinish the dining room table and any old wooden furniture in our house. Little effort is required with just a suitable supply of ingredients. A home furniture needs proper maintenance and care to keep it durable and look new. So make your dining room table shine like new with just enough touches. Hopefully, the article “How to refinish dining room table” will be helpful enough for you to refinish your dining table properly.

Leave a Comment

Your email address will not be published. Required fields are marked *